top of page
Lift Kit 4 Inch Rough Country

Lift Kit 4 Inch Rough Country

SKU: 450.2
4 Inch Lift Kit | Rear Blocks | Ford Bronco 4WD (1978-1979) | Give your 78-79 Ford Bronco an aggressive look from front to rear with Rough Countrys 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance.
This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of 7 degree c-bushings and track bar drop bracket are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts.
A set of Rough Country's premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body.
Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 35" tire with proper wheel backspacing.
Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty. | 450.2 | Rough Country | 0 | 0 | 0 | 103.95lbs

  • FITMENT | TIRE INFO

    1978-1979:4WD:Ford:Bronco | 35x12.50R15:Factory 15:5x5.5:-:-;33x12.50R16:16x8:5x5.5:+30:-;35x12.50R22:22x10:5x5.5:-18:-;35x12.50R22:22x10:5x5.5:-19:-;295/55R22:22x10:5x5.5:-18:-;295/55R22:22x10:5x5.5:-19:-;285/55R22:22x10:5x5.5:-18:-;285/55R22:22x10:5x5.5:-19:-;35x12.50R22:22x12:5x5.5:-44:Trimming Required

  • VIDEO | FEATURES

    Increased ground clearance Levels the front with the rear of the vehicle

  • CATEGORY

    Susp Lift Kits 4wd

  • NOTES | INSTALL TIME

    New rear blocks replace the factory rear block. A drop pitman arm is recommended for optimum turning radius and drag link alignment. (#6602) (#6602) pitman arm will NOT work if the original arm has a welded ball joint on the end. Vehicles with factory quad shocks (2 front shocks per side) will simply use a single aftermarket shock. | 5-7 hours

  • FRONT & REAR COMPONENTS

    Lifted coil springs Track bar drop bracket 7┬░ C-bushings Hardware | 3" lift blocks U-bolts Hardware

  • REFUND POLICY | INSTRUCTIONS

    Returns accepted within 30 days of purchase. Items must be unused, in original packaging, and include proof of purchase. Restocking fees may apply. Non-returnable items: custom orders, electrical parts, and used products. For full details, visit our Refund Policy page.
$449.95Price
Quantity
bottom of page